Clamps and Mounting Systems for Overland Vehicles

WHAT MAKES QUICK PITCH Clamps and mounting systems unique?

Quick Pitch mounting systems and Trax-Clamps are designed to last while ensuring ease of access to your overlanding essentials.

QUICK PITCH wheel cargo mounts

The Wheel Cargo Mount was designed to utilize the spare wheel on each and every vehicle with a rear mounted spare wheel. With the Wheel Cargo Mounts design you are now able to mount accessories to your rear mounted spare wheel. The 2 vertical load bars with M8 slots can be used to mount these accessories to the Wheel Cargo Mount.

The Wheel Cargo Mount was designed to utilize the spare wheel on every vehicle with a rear mounted spare wheel. With the Wheel Cargo Mounts design you are now able to mount accessories to your rear mounted spare wheel. The 2x  vertical load bars with M8 slots can be used to mount these accessories to the Wheel Cargo Mount.

The light aluminium frame is strong enough to manage any obstacle. When the spare wheel is needed you loosen 2 M8 bolts and a strap to access your spare wheel. This design makes it easy to access the spare wheel.

This Wheel Cargo Mount gives you that extra packing space all 4×4 enthusiasts and overlanders need. This bracket is fully adjustable in width and height to fit any tyre inflated or deflated and can be used only with the top bracket excluding bottom bracket in some SUV cases. Weighing in at only 7 kg it will not laden the spare wheel mount structure at all. Another invention from Quick Pitch SA.

Frequently Asked Questions About Quick Pitch WHEEL CARGO MOUNTS

Is the Quick Pitch Wheel Cargo Mount made of Stainless Steel or Aluminium?

The Quick Pitch Wheel Cargo Mount is made of light Aluminium.

Can you mount a water can or gas bottle to the top of the Wheel Cargo Mount?

Yes, the design enables you to mount accessories to the top of the Quick Pitch Wheel Cargo Mount.

QUICK PITCH RTT Trax mount

Quick Pitch RTT Trax Mount was designed to mount traction aids on top of your Quick Pitch RTT roof top tent without the use of bolts and straps.

This RTT Trax Mount mounts to the existing rails on RTT with 4 8mm bolts. The RTT Trax Mount was designed to give you easy access to your trax.

The Trax Mount is lockable to keep your trax secure.

RTT Trax Mounts is manufactured from 3mm stainless steel

Frequently Asked Questions About Quick Pitch RTT Trax-Mount

Is the Quick Pitch Roof Top Tent Trax Mount made of Stainless Steel or Aluminium?

The Quick Pitch Roof Top Tent Trax Mount is made of Stainless Steel.

Can the Quick Pitch Roof Top Tent Trax Mount be mounted to the side of your vehicle?

No, the Quick Pitch Roof Top Tent Trax Mount can only be mounted to your Quick Pitch Roof Top Tent.

Quick Pitch TRAX-TAB

The Trax-Tab was developed knowing that there is a need in the industry for an easy and safe way to clamp down on your traction aids without the use of bolts, lockers or ratchet straps. This system allows you to remove and store you traction aids in 3 seconds without undoing bolts or straps. By adding pad locks you will have peace of mind knowing your Trax are safe and secure.

An added benefit is that your Tax can be cleaned without removing it from the clamp. Quick Pitch went one step further by combining the Trax secure system with a fold down preparation table. The versatility of combining two products in one is not only space saving but also easier to use.

The system can be mounted on any vehicle or surface where needed.

Our Quick Pitch Trax Tab in Action

Frequently Asked Questions About Quick Pitch Trax-Tabs

Does the Quick Pitch Trax Tab come with traction aids?

No, the Quick Pitch Trax Tab does not come with additional traction aids.

Can the Quick Pitch Trax Tab be mounted to the side of your vehicle?

No, the Quick Pitch Trax Tab can be mounted to any vehicle or surface.

QUICK PITCH Trax-Clamp

Introducing the Trax-Clamp which is a byproduct from the Trax-Tab meant for the 4×4 enthusiast who needs the visibility of a traction aid clamp without the preparation table. This system allows you to remove and store you traction aids in three seconds without the use of bolts, quick lockers, or ratchet straps.

This product features the same innovation to a quick clamp and release of your traction aid but can be mounted on and surface due to the 8 x 8mm mounting holes which doubles up for drainage. By moving the clamp mounting brackets to a pre-cut position this unit is capable of stowing two or four Trax. By adding a pad lock you will have peace of mind knowing your Trax are safe and secure.

Frequently Asked Questions About Quick Pitch Trax-Tabs

Is the Trax Clamp and Trax Tab the same product?

No, the Trax Clamp is only a surface mounted unit for four-by-four enthusiasts who need visibility of their traction aids.

Does the Quick Pitch Trax clamp come with traction aids?

No, the Quick Pitch Trax clamp does not come with additional traction aids.

Quick Pitch Load bar

The Quick Pitch Load Bar is a versatile load bar that can be mounted to any surface. It has M8 mounting slides on all 4 sides. You can mount rooftop tents, working lights, brackets, jerry cans or any other object to any side of the load bar. It is manufactured from the best quality extruded alluminium and then powder coated black for a great look. It can also be ordered in a 6m bare length. M8 bolts can be mounted to either side and top or bottom of the Quick Pitch Load Bar, making it the ideal solution for any person to mount any accessory to the load bar.

What's included?

  • 2x 1450mm Load Bars
  • Quick Pitch end caps to give the load bar a great finish.
  • 4x 3mm Stainless steel brackets to mount the load bar

Frequently Asked Questions About Quick Pitch Trax-Tabs

Are the end caps sold desperately?

No, the end caps are included in the purchase of the load bars

Are the load bars made of Stainless Steel or Aluminium?

The Quick Pitch Load Bars are made of the best extruded aluminium and powder coated black for a great look.

Ready for adventure? Enquire about Quick Pitch's Mounting Systems and Clamps